The laser engraving machine is processed by high-temperature melting. The power of the laser engraving machine is large or small, and the power size to be purchased needs to be determined according to the material and thickness of the cut. Some people say that the laser engraving machine processing is not ideal, the edges are burnt, and the cut surface is not neat. Generally, a reasonably designed laser engraving machine does not have such a problem under normal use. Before the laser engraving machine is used, it needs to be debugged, and the debugged equipment can cut the ideal effect. In addition, the laser engraving machine must be maintained in the later stage, otherwise the wear of the accessories will also affect the processing effect of the equipment

  1. Try not to look directly at the laser.

  2. Do not put your hands on the table, and keep a safe distance between your body and the equipment.

  3, irrelevant personnel should not approach the running laser engraving machine.

  4. Be careful not to place extraneous things on the laser engraving machine, so as not to cause an open flame when it falls on the table.

  It is clear that the ventilation equipment needs to be opened during the laser engraving machine processing. The operation of the laser engraving machine must be safe to ensure safe production. Operators operating laser engraving machines need to be trained in advance and can only take up their posts after passing the assessment. Operators need to strictly abide by relevant rules and regulations. Is it clear to everyone?